Soundiron Waterharp v3
About
The Soundiron Waterharp is a deeply multi-sampled percussion and effects instrument library that captures the heart and soul of the waterphone. This unique instrument concept was originally developed by Richard Waters in the late 1960s. Waterphones — also commonly known as Water Harps — are found in all shapes and sizes, but they generally follow the same basic design: a brass vessel with a hollow brass water chamber and a long neck. The top side of the chamber is adorned with vertical brass tines or bars. It is played by strumming, striking and bowing these tines, which resonate together creating darkly harmonic or dissonant tones and textures. The tines are cut to specific lengths and arranged to create scales as they wind around the body of the waterphone. Adding water to the chamber and changing the position of the waterphone drastically changes the pitch and harmonics that are produced when the instrument is played. The water chamber itself can also be played as a percussion instrument. Overall, the waterphone can be considered as both a tuned and un-tuned percussion instrument, but is most often used in suspense and horror soundtracks and sound design as a dramatic sound effect tool.
We played it with lots of different mallets, sticks, metal rods, fingers and palms, bows and even voices to explore every nuance and hidden musical potential of this instrument. We recorded it both empty and full of water. We even recorded it from the inside out using hydrophones (underwater microphones), while being cooked over open flame and while filled with machine screws. And finally, we created a wide selection of ambient soundscapes, pads, drones, ambiences and atmospheres using the recordings and all manner of creative sound design techniques to take this library to the next level.
Contents
Bowing (no water) Slow, Medium, Fast FX
Bowing sweep (water) Slow, Medium, Fast FX
Bowing 2-note legato
Bowing Sustain (with and without water)
Bowing Staccato
Bowing FX grinding w/ tine buzz (with and without water)
Bowing FX w/ magnets
Bowing FX w/ hydrophone (underwater mic)
Bowing FX w/vocals
Bowing FX boiling at four different temperature levels
Mallet Rubber (6-7 velocity layers – 6 round robin) at +16 tines
Mallet Metal (6-7 velocity layers – 6 round robin) at +8 tines
Hand Played “Metal Tabla” (10 velocity layers – 10 round robin) bottom and top
Wooden Mallet (6-7 velocity layers – 6 round robin) at +20 tines
Hydro Mallets (6 round robin) at +20 tines
Rubber, Metal and Wooden Mallet Sweeps (Slow, Medium, Fast)
Hydro-Vocal drones, phrases and more…
Custom ambiences, including patches by Steven Tavaglione (Ambient music on Wall-E, American Beauty and more)
Waterharp 3.0 includes an upgraded user interface for both Kontakt 6 (full version 6.2.2) and the free Decent Sampler engine. We’ve optimized presets to put each category right at your fingertips, with easy articulation menu loading. We've also added a new range of deep ambiences, synths and sound-designed atmospheres, all hand-crafted from the original instrument source.
Product Specs
Features:
- 8.9 GB installed
- 3,017 Samples
- 21 Kontakt 6.6.2 .nki instrument presets
- 15 Decent Sampler 1.11.18 .nki instrument presets
- 24 bit / 48kHz uncompressed PCM wav audio
- Unlocked Kontakt and Decent Sampler presets and wav samples to allow complete flexibility and freedom
- 100+ Bonus Pads, Soundscapes and Atmospheres
- Dozens of our custom convolution reverb impulses with a variety of different room, hall and special effect acoustic environments.
Requirements:
- mac
- ram:3
- disk:9
- version:Mac OSX 10.12 or higher
- additional_requirements:Multi-Core CPU, 3 GB System Ram, SATA or SSD hard drive recommended for this library.
-
plugins:
- VST-2
- VST-3
- AU
- AAX
- RTAS
- STAND-ALONE
- windows
- ram:3
- disk:9
- version:Windows 7 or higher
- additional_requirements:Multi-Core CPU, 3 GB System Ram, SATA or SSD hard drive recommended for this library.
-
plugins:
- VST-2
- VST-3
- AAX
- RTAS
- STAND-ALONE
Videos: