Celestion CDX1-1730 40W 8ohm HF Neodimio
Celestion - CDX1-1730 40W 8ohm - HF Compression Driver - Neodimio
Driver a compressione con magnete in neodimio, uscita da 1"", potenza 40Watt, impedenza 8ohm,
diaframma in PETP (polietilene tereftalato), fissaggio con viti (bolt).
Caratteristiche
- 1"" exit, neodymium magnet compression driver with 1.75"" edgewound copper clad aluminium voice coil
- 40Wrms (AES standard) power handling and 110dB sensitivity
- Designed with Sound Castle™ clamping to ensure uniform pressure on diaphragm assembly for reduced acoustic distortion
- One piece PETP film diaphragm and surround
- Advanced Finite Element Analysis (FEA) tools used to create a very light weight, high powered compression driver
Specifiche Generali
Power rating(1): 40Wrms
Continuous power rating(2): 80W
Nominal impedance: 8ohm
Sensitivity(3): 110dB
Frequency range: 1200-20,000Hz
Recommended min. crossover (12dB/oct): 2200Hz
Voice coil diameter: 44mm/1.75in
Voice coil material: Edgewound copper clad aluminium
Magnet type: Neodymium
Diaphragm material: PETP film
Surround material: PETP film
Informazioni di Montaggio
Maximum width: 88.5mm/3.48in
Minimum width: 82.0mm/3.23in
Depth: 55mm/2.2in
Weight: 0.65kg/1.4lb
Fitting: Flange (4 x M6 holes on 76mm/3in PCD)
Throat exit: 25.4mm/1in
Trombe Compatibili
H1-9040P, H1-7050 ""No Bell""
Note
(1)Tested for two hours on plane wave tube using continuous band-limited pink noise as per AES standard. Power calculated on minimum impedance.
(2)Continuous Power Handling is defined as 3dB greater than the AES rating.
(3)Measured on axis at 1W/1m, using typical horn, in 2 anechoic environment.
Per stampare la scheda prodotto, clicca qui
Per una panoramica su tutta la serie Celestion CDX Neodimio, clicca qui
Per consultare e scaricare la brochure originale Celestion Pro Audio, clicca qui