Xhun Audio Xhun Instruments Bundle

IronAxe:

IronAxe is a high-end Physical Modeling simulation of one of the most popular and loved electro-acoustic instrument: the Electric Guitar.

The result of two years of research and development, IronAxe simulates the physics of all the acoustic and electronic components found in the original instrument, preserving the same nuances and multi-techniques playability impossible to perform on standard frozen-sounding sampled instruments.

The main goal of this kind of approach adopted by Xhun Audio is to break with the past - forgetting all the old, expensive, bulky sample libraries to embrace a new generation of alive, expressive, physical modeled instruments.

With IronAxe you can build your custom Electric Guitar, choose Pickups type, number and position, set the Tone knobs to get the right sound, select the Plectrum hardness or pluck a String with fingers at any point along its length. And finally take real-time control of all this (and much more...) using a MIDI Keyboard or a real - natively supported - MIDI Guitar.

And the included full set of analogue modeled Stompboxes, legendary Amp/Cabinets and Room Simulation, make IronAxe an advanced tool for guitar sound designing, without the need of additional and external software/hardware units.

REQUIREMENTS:
- Windows 32-bit : VST2

LittleOne:

LittleOne by Xhun Audio is a faithful software emulation of one of the most legendary and appreciated hardware analog synthesizers.

In addition to the whole signal path simulation, every single component inside LittleOne (oscillators, filter, envelopes, LFO ...) features the original frequency responses and ranges of the hardware counterpart, producing a deep, rich and warm sound.

Add to the equation a full rack with a 16-step MIDI sequencer, a 16-step trancegate effect, and two master effects slots and the result is a complete analogue-sounding instrument - all in the digital domain.

REQUIREMENTS:
- Windows 32-bit : VST2, VST3
- Windows 64-bit : VST2, VST3
- macOS 64-bit : VST2, VST3, AU

ResonHeart:

ResonHeart is the physical modeling simulation of a never seen before, experimental, aerophone-based acoustic instrument.

Characterized by a complex model-based architecture, this original machine has expressly been built to mimic the sound of different families of acoustic instruments - like winds, membranes, chromatic percussions, ethnic lutes and whistles, glasses, cymbals, and crashes, vocal ensembles, and choirs, or even an entire orchestral strings section - as well as to produce very unconventional, organic tones, evolving textures, and expressive motion pads.

Working on the principles of fluid dynamics and designed to potentially be a real-world replicable machine, every single component inside ResonHeart has been modeled after existing hardware - commercially available devices like air pumps, pneumatic valves, and metal resonators. Also, the surrounding room acoustics has been carefully modeled, simulating a wide range of spatial environments, from small chambers to big concert halls, to stone-walled cathedrals and beyond.

Moreover, ResonHeart features a clean and intuitive interface, making the sound designing process just simple and effective.

REQUIREMENTS:
- Windows 32-bit : VST2, VST3
- Windows 64-bit : VST2, VST3
- macOS 64-bit : VST2, VST3, AU

Zerobox:

ZeroBox is an accurate analogue modeling simulation of a legendary, iconic, sequencer-driven bassline synthesizer that defined an era.

In addition to a meticulous replica of both the signal path and the physics of each of the electronic components found inside the original device (oscillator, filters, envelopes, etc.), an extended set of features, improvements and circuit-bents have been added, bringing the whole synthesis engine a step ahead.

Last but not least, a redesigned sequencer front-end and the inclusion of a full set of modulation, analogue saturation and multi-type distortion effects units make ZeroBox an expressive, powerful, self-contained tool for use in any electronic music scenario.

REQUIREMENTS:
- Windows 32-bit : VST2, VST3
- Windows 64-bit : VST2, VST3
- macOS 64-bit : VST2, VST3, AU

Features:

1. IronAxe: Physical Modeling simulation of real electronic and acoustic components.
2. IronAxe: Sound manipulation at the source core. Sound is actually generated, not sampled.
3. IronAxe: True-to-life sound realism and articulations playability.
4. IronAxe: Super smooth dynamics - no velocity layers.
5. IronAxe: Instrument and Presets load in a flash.
6. IronAxe: Small memory footprint (for both RAM and Hard Disk).
7. IronAxe: Installs in less than a minute.
8. LittleOne: Analog Modeling simulation of real analogue hardware.
9. LittleOne: An all-in-one complete synthesis setup.
10. LittleOne: Analogue Components Emulation. Oscillators, Filters, LFOs (, ...) simulate the micro-instability and imperfections of the analogue technology. This feature brings richness, genuineness and depth to the sound.
11. LittleOne: Two aliasing-free Analog Modeled Oscillators featuring continuous selection mode (like the original) between Triangle, Saw, Square, Pulse.
12. LittleOne: A 4-Pole resonant Low Pass filter modeled on the classic Ladder, featuring the original frequency responses, self-oscillation, authentic soft-clipping and overload control.
13. LittleOne: Two 4-Stage (ADSR) Envelope Generators with exponential response.
14. LittleOne: Modulation LFO with the original waveforms and frequency ranges (0.2~500 Hz) including FM possibilities.
15. ResonHeart: Full 64-bit processing accuracy for every single aspect of the simulation
16. ResonHeart: Entirely made of mechanical components (resonators, motors, valves) which have been modeled after existing, commercially available parts
17. ResonHeart: Air pump motors with dedicated automations and retrig control
18. ResonHeart: Swing motors and valves (from 0.1 Hz up to 20 Hz)
19. ResonHeart: Pneumatic solenoid valves (with a 3-ms aperture, 2-ms disclosure timing)
20. ResonHeart: A dedicated modulation for resonators' tuning, featuring Swing, Contour, Velocity and Pitch Follower controls
21. ResonHeart: A 100% original aerophone-based mechanical acoustic instrument, featuring an articulated modal architecture and capable of mimicking other acoustic instruments' tones and flavours

Requirements:

• mac
  • ram:0
  • disk:0
  • notes:OS 64-bit and later
  • support:
    • 64_bit
  • plugins:
    • VST-2
    • VST-3
    • AU
• windows
  • ram:0
  • disk:0
  • notes:Win 7 and later
  • support:
    • 32_bit
    • 64_bit
  • plugins:
    • VST-2
    • VST-3

Videos: